NewM/GE-PSW-PSE-01
M-GE-PSW-PSE-01M-GE-PSW-PSE-01-sideM-GE-PSW-PSE-01-front

Mini Fast / Gigabit Ethernet PoE+ Media Converter
10/100/1000Base-T PoE+ RJ-45 Port + 100/1000Base-X SFP Slot

M/GE-PSW-PSE-01

Product Details

SKU M/GE-PSW-PSE-01
Description

10/100/1000Base-T PoE+ RJ-45 port [100 m/ 328 ft.] to 100/1000Base-X SFP slot (empty)

Note

Note: Cannot be used with M-MCR-01 or E-MCR-05 Racks due to power limitations

Add to Quote

Description

This Gigabit Ethernet Stand-alone Mini Media Converter provides cost-effective media conversion between 10/100/1000Base-T ports and 100/1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and its small size makes it ideal for locations where space is limited. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, but it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber.

In addition to providing copper to fiber conversion, this converter is also classified as Power Sourcing Equipment (PSE), meaning it combines data received over the fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over the twisted Pair cable, while complying with the IEEE 802.3af and IEEE 802.3at PoE+ standards. This allows the user to take advantage of the benefits of fiber cabling, along with the benefits of Power-over-Ethernet (PoE) technology.

Supporting PoE allows this converter to send data and power to devices like VoIP Phones, Security Cameras, and Wireless Access Points, especially if they need to be located in remote areas of your network that can only be reached with fiber optic cabling.

Features

  • Wall mount, DIN Rail, or table top installation
  • External AC/DC power supply included with country specific power cord
  • 2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port
  • Supports full 30 Watts of power to the twisted pair port
  • SFP slots can support any 100Base-FX or 1000Base-X fiber SFP module
  • Supports Auto-Negotiation
  • Supports Auto-MDI/MDIX
  • Active Link Pass Through (ALPT)
    • Automatically detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices
  • Auto Power Reset
    • Re-set the power to the end PD device during a Link Pass Through (LPT) event, ensuring it is ready to go when the fault is corrected
  • Jumbo frame support
  • 8K MAC address table
  • LEDs indicators for power status, Link/Activity per port, & PoE status/ classification
  • Plug-and-Play fixed configuration, no dip-switches
  • Over-current protection
  • Under-current protection
  • Fault protection input

Specifications

Standards IEEE 802.3-2012
IEEE 802.3af/at PSE-PoE
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3az
Switch Features Max Packet Size: 10,000 bytes
Max MAC Addresses: 8k
1Mbit shared buffer memory
Status LEDs PWR: On (green) = Power to converter
PoE: Off = No PD detected, On = AF mode or AT mode
Top LED TP Status
Bottom LED Fiber Status
Dimensions Width: 1.8” [46 mm]
Height: 0.85" [22 mm]
Depth: 3.3” [85 mm]
Power Consumption 34W with full IEEE 802.3at 30 Watt load
Power Source External AC/DC 56VDC, 40W power adapter
Power-over-Ethernet Max PoE Budget: 30 Watts
Environment Operating: 0°C to +40°C (with included power supply)
Storage: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 2 lbs. [0.9 kg]
MTBF M/GE-PSW-PSE-01 only: 2,941,024 hours (Telcordia SR-332)
Included Power Supply only (25173): 159,357 hours (MIL-DHBK-217F)
Certifications EN55032-2012 Class A, IEC 61850-3:2002, EN55024-2010, CE Mark, Power Supply is UL listed
Warranty Lifetime

Ordering Information

SKU Description  
M/GE-PSW-PSE-01

10/100/1000Base-T PoE+ RJ-45 port [100 m/ 328 ft.] to 100/1000Base-X SFP slot (empty)

Add to Quote

Note: Cannot be used with M-MCR-01 or E-MCR-05 Racks due to power limitations