PB-TDM1-Contra Series
PB-TDM1-CONTRA SeriesThis image is a family photo and is not representative of every SKU
PB-TDM1-Contra SeriesPB-TDM1-CONTRA-ACPB-TDM1-CONTRA-DC

Contra G.703 64Kbps CESoPSN Unit
(1) DB15 Port + (2) 10/100/1000Base-T Ports + (1) 100/1000Base-X SFP Slot

PB-TDM1-CONTRA Series

SKU: N/A Datasheet: PB-TDM1-CONTRA Series Datasheet (211.30 KB) Product Line:
Clear
Add to Quote

Description

The PB-TDM1-CONTRA Series enables a Contra-clocked, 64Kbps G.703 circuit to be transported over Ethernet or IP networks. The units are typically deployed in pairs, connecting the Contra clocked CPE across the packet network. Point to multi-point applications are supported with a maximum of 16 slaved devices connecting to a master unit.

For Contra applications requiring low latency operation, comprehensive features are available via the management system to tune the unit’s performance.

Features

  • Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP
  • Highly accurate & stable clock recovery
  • Oscillator Performance
    • Hold-over 24hrs 150ppb (typical)
    • Aging per day 10ppb
    • Temperature Stability 12ppb
  • G.823/4 Synchronization levels
  • Contra port
    • 1 port – DB15 (female) connector
    • G.703 64kbps contra
    • Presents as DCE (cables for DTE)
    • ITU G.706
    • Transparent to user signaling
  • Support for Jumbo Packets up to 9,600 bytes on Ethernet ports
  • Port based VLAN, IEEE 802.1Q VLAN including Q-in-Q
  • Link Aggregation Control Protocol (LACP)
  • Ring Protection: MSTP, RSTP, STP
  • SNMP v1, v2c and v3
  • RMON and Syslog
  • Management via CLI, Telnet, SSH, SSL, SNMP, Web GUI
  • Authentication: Radius, TACACS+, IEEE 802.1x
  • IGMP Snooping
  • LLDP
  • IPv6 and IPv4 dual protocols
  • Firmware/Configuration backup/restore via Web/FTP
  • TDM packets can be assigned IP Diffserv (DSCP) or ToS and IEEE 802.1p CoS values
  • Supports full IEEE 802.1Q tagging & associated IEEE 802.1p CoS prioritization levels
  • All egress packets, including TDM links, can be prioritized across four output queues
  • Various clocking options for different network types & clock recovery requirements
  • Quality of Service: Supports 8 hardware queues with strict priority and WRR, shaping, policing. Per port bandwidth management.

Applications

  • Contra

 

Specifications

Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3x
IEEE 802.3ad
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1w
IEEE 802.1s
IEEE 802.1x
IEEE 802.1AB
ITU-T G.823/4
ITU-T G.703
Ports (1) Contra DB15 (female) connector
(2) 10/100/1000Base-T RJ-45 ports
(1) 100/1000Base-X SFP slot (empty)
(1) RJ-12 console port
Dimensions Width: 8.86" [225 mm]
Depth: 7.87” [200 mm]
Height: 1.73” [44 mm]
Power Input AC Version
Bale lock cable clamp
Auto-sensing 100VAC-240VAC, 47-63Hz
Max consumption 0.2A @ 230VAC
Typical Consumption 18 Watts

DC Version
External presentation -48VDC, 0VDc and GND via external screw down termination
Wide input range -18V to -72V
Typical consumption 13 Watts
Environment Operating: 0°C to +60°C
Humidity: 10% to 90% (non-condensing)
Weight 5.73 lbs. [2.6 kg]
Certifications CE Mark
EN60950-1:2006+ A11:2009+ A1:2010+ A12:2011
EN50121-4:2006, EN61000-3-2:2006+ A1&A2:2009
FCC CFR47 Parts15: 107&109,
CB Scheme Certified
Warranty 1 Year

Ordering Information

SKU Description  
PB-TDM1-CONTRA-AC PB-TDM1-CONTRA-AC

(1) DB15 port + (2) 10/100/1000Base-T ports + (1) 100/1000Base-X SFP slot (empty) AC input (serial control cable included)

 Add to Quote
PB-TDM1-CONTRA-DC PB-TDM1-CONTRA-DC

(1) DB15 port + (2) 10/100/1000Base-T ports + (1) 100/1000Base-X SFP slot (empty) -48VDC input (serial control cable included)

 Add to Quote

Resources

Accessories