SPOEB1013-105 & SPOEB1011-105This image is a family photo and is not representative of every SKU

Stand-alone Fast Ethernet PoE Media Converter
10/100Base-TX PoE PSE to 100Base-FX

SPOEB Series

Name: SPOEB Series
SKU: 747
Availability: InStock

SKU: N/A Datasheet: SPOEB Series Datasheet (296.88 KB) Product Lines: Media Converters, Extenders & NIDs, Power-over-Ethernet Products

Description

The SPOEB Series is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection.

Transition Networks’ AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under- Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize, also known as Powered Device Reset.

The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.

Features

External AC power supply
IEEE 802.3af Power-over-Ethernet Compatible
48 VDC PSE Output Voltage
Signal Pair or Spare Pair Power Insertion
PD Detection Signature
Over-Current Protection & Under-Current Detection
Powered Device Reset
Switch selectable and port settings
Minimum Load Sensing
Fault Protection Input
Auto-Negotiation
Auto-MDI/MDIX
Link Pass Through (LPT)
Far-End-Fault (FEF)
Automatic Link Restoration

Specifications

Standards	IEEE 802.3 IEEE 802.3af
Data Rate	10/100 Mbps
Max Frame Size	1600 bytes
Switch	SW1: Auto-Negotiation On/Off (TP) SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off) SW3: Duplex TP: Force Half or Full-Duplex (SW1 off) SW4: Duplex Fiber: Half or Full-Duplex SW5: Link Pass Through On/Off SW6: PSE On/Off SW7: PSE/LPT on/off SW8: N/A
Status LEDs	Power Fiber Link, Activity, & Duplex Copper Link, Activity, Speed, & Duplex PoE Status
Dimensions	Width: 3.25” [82.55 mm] Depth: 4.8” [121.92 mm] Height: 1" [25 mm]
Power Consumption	20 Watts (max)
Power Supply	External power supply: 90 – 250 VAC Input; 48VDC Output
Environment	Operating: 0°C to 50°C Storage: -25° to +85°C Humidity: 5% to 90% (non-condensing) Altitude: 0 – 10,000 ft.
Weight	2 lbs. [0.90 kg]
MTBF	49,981 MIL217F2 Hours; 132,144 Bellcore Hours
Certifications	EN55022:1994+A1:1996+A2:1997 Class A, FCC Part 15 Subpart B, UL 1950
Warranty	Lifetime

Ordering Information

SKU	Description
SPOEB1040-105	10/100Base-TX PoE (RJ-45) [100 m/328 ft.] to 100Base-X SFP Slot (empty)	Add to Quote
SPOEB1011-105	10/100Base-TX PoE (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (ST) [2 km/1.2mi.] Link Budget: 11.0 dB	Add to Quote
SPOEB1013-105	10/100Base-TX PoE (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (SC) [2 km/1.2mi.] Link Budget: 11.0dB	Add to Quote
SPOEB1039-105	10/100Base-TX PoE (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm multimode (LC) [2 km/1.2 mi.] Link Budget: 11.0 dB	Add to Quote