Stand-alone RS232 Remotely Managed Media Converter
RS232 Copper to Fiber

SRS2F Series



The SRS2F Series stand-alone serial RS232 to fiber converters allow you to extend the distance between serial connections with the use of fiber optic cable. These full-featured stand-alone converters transmit the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115 Kbps. Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote terminals and building access/alarming systems to a host computer. Ideal for campus or business environments where remote devices can be networked in a point-to-point configuration where distances are greater than the 15 meter limitation of conventional copper serial cables.

In addition, these stand-alone media converters can also be managed from remote locations, in-band, over the fiber, when linked to a CRS2F Series installed in a managed Point System™ chassis.

Please note: this product is soon to be retired and replaced by the ION Platform. Limited quantities may still be available, contact our sales team to find out more. For more information, view the Point System vs ION product comparison and cross reference guide.



  • Remote Management
  • Local or Remote Loopback on copper and fiber
  • DTE/DCE switch for easy installation with straight-through cabling
  • Full/Half-duplex asynchronous transmission at speeds up to 115 Kbps
  • Supports the following flow control signaling:
  1. DCD – Data Carrier Detect
  2. RXD – Receive Data
  3. TXD – Transmit Data
  4. DTR – Data Terminal Ready
  5. SG – Signal Ground
  6. DSR – Data Set Ready
  7. RTS – Request To Send
  8. CTS – Clear To Send


Standards EIA/TIA-574
Data Rate 115 Kbps
Switch DTE/DCE: Select appropriate position
Loopback: Norm = normal operation;
Loop = Fiber and copper loopback
Status LEDs P: (Power): Lit for normal operation
RX: Steady = Copper Link;
Flashing = Rx Data
FL: Steady = Fiber Link;
Flashing = Loopback mode
Dimensions Width: 3.3” [84 mm]
Depth: 4.8” [122 mm]
Height: 1.2” [30 mm]
Power Consumption 5 Watts
Power Supply External AC/DC; 12 VDC, 0.5A min output; 120-240VAC input
Environment Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 2 lbs. [0.90 kg]
Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified
Emissions: CISPR22/EN55022 Class A + EN55024,
EN60950 Class A, FCC Class A, CE Mark
Warranty Lifetime

Ordering Information

SKU Description  

DB-9 [15 m/49 ft.]
to 1300nm multimode (ST) [2 km/1.2 mi.]
Link Budget: 11.0 dB

Add to Quote

DB-9 [15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB

Add to Quote

DB-9 [15 m/49 ft.]
to 1310nm single mode (SC) [20 km/12.4 mi.]
Link Budget: 16.0 dB

Add to Quote