8 port Managed Hardened Gigabit Ethernet PoE++ Switch

Managed Hardened Gigabit Ethernet PoE++ Switch
(8) 10/100/1000Base-T PoE++ Ports + (2) 100/1000Base-X SFP Slots


Product Details


(8) 10/100/1000Base-T PoE++ ports + (2) 100/1000Base-X SFP slots
52V – 57 VDC (Din Rail Bracket included)

Add to Quote


The SISPM1040-582-LRT is a managed PoE++ switch suitable for connecting and powering devices in hardened environments. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on (4) ports or 60 Watts per port on (8) ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.


  • Plenum UL certified
  • IPv4/IPv6 dual protocols
  • Supports Jumbo Frame up to 9K bytes
  • Authentication – RADIUS, TACACS+
  • DHCP Relay, DHCP Snooping, DHCPServer
  • L2/L3/L4 ACLs Support MAC, VLAN ID, or IP address, protocol, per port
  • LLDP (Link Layer Discovery Protocol)
  • ITU-T G.8031 Ethernet Linear Protection
  • ITU-T G.8032 Ethernet Ring Protection Switching
  • Rapid Ring for fast recovery
  • IEEE 802.3az Energy Efficiency
  • IP Source Guard, Port Security
  • Port Mirroring
  • Syslog

PoE Features

  • Compliant with IEEE 802.3bt PoE++
  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • PoE Configuration
  • PoE Scheduling
  • Power Delay
  • Auto Power Reset
  • DHCP per Port
  • Always on PoE

Software Features

  • Management: Web Management, SNMP V1/V2c/V3, SSH, CLI
  • Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP) and static trunk
  • Multicast: Support IGMP Snooping V1/V2/V3, MVR, MLD Snooping V1/V2
  • Quality of Service: Supports 8 hardware queues. Strict priority and WRR, Ingress policer, Egress shaping and per port rate control
  • Spanning Tree: Supports IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, QinQ, MAC-based VLAN, Management VLAN, Voice VLANs, and Private VLAN
  • Firmware Update through TFTP, SFTP, and HTTP/HTTPs
  • IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731
  • Support IEEE 1588 v2 PTP
  • Media Redundancy Protocol (MRP)
  • Static Routing

Device Management System

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network Diagnostic, protection mechanism, performance and link management


Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3z
IEEE 802.3ae
IEEE 802.3x
IEEE 802.3ad
IEEE 802.1D
IEEE 802.1w
IEEE 802.1s
IEEE 802.1Q
IEEE 802.1p
IEEE 802.1ad
IEEE 802.1AB
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
IEEE 802.3ah
IEEE 802.1ag
IEEE 802.3az
IEEE 1588 v2
ITU-T Y.1731
ITU-T G.8031
ITU-T G.8032
Protocols CSMA/CD
Technology Store-and-forward switching architecture
Connectors (8) 10/100/1000 Mbps RJ-45 ports
(2) 100/1000 Mbps SFP slots
(1) Console RJ-45 port
MAC Address 8K MAC address table
Backplane 20 Gbps
DIP Switch Rapid Ring Setting (2-Pin)
Reset Button Reset the switch, restore factory default
Digital Output (relay) 24VDC/1A
Digital Input Level 0 (Low): 0V to 6V
Level 1 (High): 10V to 24V
Dimensions Width: 2.44” [62 mm]
Depth: 5.12” [130 mm]
Height: 5.31” [135 mm]
Power Consumption 13 Watts (without PoE)
Power Input 52 - 57VDC dual inputs Terminal Block
Power-over-Ethernet Max PoE Budget 480 Watts
60 Watts for (8) ports simultaneously
Up to 90 Watts on (4) ports simultaneously
Ingress Protection IP30
Environment Operating: -40°C to +75°C (DC input)
MTBF 82,976 hours
Certifications FCC Class A; CE; NEMA TS-2, UL 2043, UL 2108
Safety: EN62368-1, UL62368-1
Compliant* (Designed to Meet) IEC61850-3, IEEE 1613, Class 1 Div 2

*Please contact sales with certification needs
Warranty 5 Years

Ordering Information

SKU Description  

(8) 10/100/1000Base-T PoE++ ports + (2) 100/1000Base-X SFP slots
52V – 57 VDC (Din Rail Bracket included)

Add to Quote